|
More Options shown for example
|
AA2
Camp and Field Shown in Pic with
Tiger Maple Handle Brass Pins
Special Order Kephart...Shown in Pic...
Tiger Maple Handle
KEP
click on pic for more options
KEPshort
AA2 Camp and Field... THIS KNIFE that
WAS FEATURED IN THE NOV/DEC 2004 ISSUE OF Backwoodsman Magazine...It is
now available as a special order knife..
Handforged full tang 1095 High Carbon Steel....4
1/2 inch blade Handle size will be balanced out to meet blade
length usually 4 1/2”..... Pattern finish blade or satin
finish available Your choice of: Tiger Maple, Curly Maple, Black
Walnut, Cherry, antiqued Ash, hickory...If a special handle material is
wanted contact me. Price with Handstitched Sheath $95.00 plus shipping
add $10.00 for Osage
Stag option $120.00 plus shipping...See Sheaths Page
for Sheath options
AA2
KEP...Kephart Field Knife....
Handforged full tang 1095 High Carbon Steel....
My standard sized Kephart
Overall size about: 8 7/16” blade Size
about 4 3/16”
Handle size about 4 1/4”
Spine Tang about: 1/8” thick or
available 3/32” for those that prefer a lighter blade.....Aged
Pattern finish blade or satin finish available
Available in antiqued black walnut, Tiger Maple.
Antiqued ash or Hickory, cherry.. Osage add 10.00 more
Standard Size Kephart Price with Handstitched
Sheath $139.00...plus shipping
Options available for handle/Sheath and pins....If
a special handle material is wanted contact me.
See Sheaths Page for
Sheath options
KEPshort...Short Version.... A Short Version of the standard Kephart
Handforged full tang 1095 High Carbon Steel....
Overall size about: 6 1/4”
blade Size about 3” to 3 1/8 ”
Handle size about 3 1/4” Spine Tang
about: 1/8” thick
Aged Pattern finish blade or satin finish
available, Available in antiqued black walnut, Tiger Maple. Antiqued
ash or Hickory, cherry.. Osage add 10.00 more Price with
....Handstitched Sheath $125.00...plus shipping
Camp and Field Shown in Pic with
Tiger Maple Handle Steel Pins
FF6 Stag Hunting and Field knife
options...............Stag Knives are beautiful and these are all
hardwork’n as well...
Handforged full tang 1095 High Carbon Steel with
pattern style finish.... or satin finish
Blade lengths range from 3 1/2 inch to 6 inch.
Handle lengths to balance out... blade tang 1/8 thickness.
All are Elk Stag Handled...*Each piece of elk stag takes on its
own charachter when working it...all excellent quality Pricing
Starts at $135.00
for smaller blades with Handstitched Sheath
Steel, or brass pins..contact for more info
on pricing...
you can view some sheath options here
other Stag Knife Designs are possible..
See Sheaths Page for
Sheath options
Stag Hunting and Field Knife Options
ML Knives
KEP
Standard sized Kephart...Shown in Pic
below...Tiger Maple Handle
Standard sized Kephart...Shown in
Pic...antiqued Black Walnut Handle
WBN....Woods and Bush Knife...(Shown Below)
Handforged full tang 1095 High Carbon Steel....
Overall size about: 9 1/2” Blade Size
about 4 9/16”
with about a 4 1/8” cutting
Edge..Handle size about 4 3/4” with a slight palm swell
Spine Tang about: 1/8” thick ...........
Blade width about 1” wide at widest point.
Aged Pattern finish blade or satin finish
available
Available in antiqued black walnut, Tiger Maple.
Antiqued ash or Hickory, cherry., curly maple
Price with Handstitched Sheath $149.00...plus
shipping
Options available for handle/Sheath and
pins....If a special handle material is wanted contact me.
Also Available in Green Canvas Micarta $169.00
plus shipping Black Paper Micarta 159.00 plus shipping
See Sheaths Page for
Sheath options
Woods and Bush Knife shown with Curly
Maple, Brass pins, Brass lined lanyard
with braided leather Thong
LST..Last Chance Carry
click on pic for more images
WBN....Woods and Bush Knife...
Short Kephart Shown with Satin Finish
Tiger Maple and Brass pins
These Photo’s Courtesy of
Reuben Bolieu
PRC....“Frontier Hunter
Skinner”...(Shown Left)
modled after the early style 1800’s price
skinner
Handforged full tang 1095 High Carbon Steel....
Overall size about: 9 3/4” Blade Size
about 5” with about a 4 3/4” cutting
Edge..
Bird beak style grip, Handle size about 4
3/4”
Spine Tang about: 1/8” thick .with a
tapered forward clip
Blade width about 1 1/4” wide at widest
point.
Aged Pattern finish blade or satin finish
available
Elk Stag handle material, steel pins over brass
washesr.
Price with Handstitched Sheath $199.00...plus
shipping
pricing with tiger maple, black walnut, antiqued
ash
169.00 plus shipping
Options available for handle/Sheath and pins....
If a special handle material is wanted contact me
See Sheaths Page for
Sheath options
PRC..Frontier Hunter Skinner...shown with ELk
stag...steel pins over brass washers
Camp and Field Shown in Pic with
Tiger Maple Handle Brass Pins
satin Clean finish
AA2
KEP
Copyright © 2008 Matthew Lesniewski ML Knives
LST....“Last Chance Carry”...(Shown
Right)
A Handy shorty that can be set up for the pocket
or neck knife
made with no handle material as shown..
Handforged full tang 1095 High Carbon
Steel...(convex ground).
Overall size about: 4 7/16” Blade
Size about 2” ..
Handle size about 2 3/8”...rear lanyard
hole with leather
Spine Tang about: 1/8” thick..Blade width
about 1 1/16” wide at widest point.
Aged Pattern finish blade or satin finish
available
Price with Handstitched Neck or Pocket Sheath
$49.00...plus shipping
click on pic for more images
As most of my Customers know. Custom knives
are made per your order all the time.. From sketches you have sent or a
Special request... from you...THANK you again for all your
support.....
Below are knives available per your custom order!
...Each are Handforged and original...
|
Short Belt “Early Bowie
Styling”
|
Bowie Options... ML Knives
AA2
Camp and Field Shown in Pic with Stag and steel
Shown above in three Stag Pic...Top 6” inch blade 1/8 tang...199.00 plus shipping
.Middle knife Beefed Up Drop Point Fileworked
5” blade 3/16” tang 179.00..plus shipping
bottom knife standard Kephart with stag 159.00
plus shipping... All come with handstitched sheath
Woods and Bush Knife shown with Osage Handle,
Brass pins, Brass lined lanyard with braided leather Thong
Standard sized Kephart...Shown in Pic...
Tiger Maple Handle Pattern aged blade
Woods and Bush Knife shown with Black Paper
Micarta, Brass pins, Brass lined lanyard with braided leather Thong
Standard sized Kephart..Shown in Pic...Satin
Finish..Walut Handle
Each are unique handforged Pieces of Art that are
functional
Even if you were to order 2 of the same style both
would be a bit different and original.....
A. 20% deposit is required and Balance upon
completion of order B.Wait time depends on workload at the time
contact me for lead time
C. Prices can vary depending on handle material or
a variation of blade per your request. D. All sheaths are
handstitched from The finest Leather that we get form the oldest
tannery in the USA. I accept Paypal...money
orders...personal checks upon clearance..Major
Credit Cards F. Prices shown
above exclude shipping. Shipping is $9.00 anywhere US
Insurance is optional.
G. Order through Email or phone. (518) 843-7216
Matt or Becky Matt
Lesniewski ML Knives PO Box 769 Hagaman
NY 12086
Camp and Field Shown in Pic with Osage and brass
AA2
Woods and Bush Knife shown with Antiqued Ash,
Brass pins, Brass lined lanyard with braided leather Thong
WBN....Long Bowie
Handforged 1095 High Carbon Steel....
12” Blade 5” Handle
Handforged Steel Guard
Steel butcap
Brass backed spine 1/4” thick
Blade width about 2” wide
Aged Pattern finish blade
Pricing starts at $450.00 Plus shipping
Handstitched sheath included
call or email for options and pricing.
